Products

Canfield Connector offers a wide selection of quality electronic devices. We specialize in interconnection devices, electronic timers, proximity sensors, modules and specialty electronic devices.  Our DIN 43650 solenoid valve connectors are the core of Canfield Connector and come in MINI, ISO and Sub-Micro 8mm or 9.4mm sizes, and both hardwired or fully molded versions to fit your needs.





Solenoid Valve Connectors

Solenoid Valve Connectors Accessories

GatorMate Deutsch Style Connectors

M8 and M12 CANFAST Round Connectors

Cylinder Proximity Sensors

Inclination Sensing and Tilt Switching

Proportional Drivers

Timers and Electronics

Condensate Drain Valves

Custom Assemblies

Sales Aids



7000 - High Current

The Canfield 7000 Series proximity sensors are used to sense position on cylinders. They accommodate 2 to 8 inch bore tie rod cylinders or 3/4 to 4 inch round cylinders. This proven design is rugged yet cost effective. The Series 7000 boasts the largest number of custom circuits to match applications found in the market. Examples include; 1 or 4 Amp reed switches, normally open, normally closed or SPDT switch types, reed or electronic sensing elements in the same package style, and the industry’s first 120 VAC Hall sensor. A wide range of enclosures and connector options are available. To reduce stocking requirements, two clamp options feature a self-adjusting clamp for NFPA and other tie rod cylinders from 2 to 8 inch bore. Another clamp option features a band clamp from 3/4 to 4 inch round cylinders.

MORE...

REQUEST
A
QUOTE
CATALOG PAGE
AND
INSTALLATION GUIDE
7C - High Current

The Canfield Connector 7C Series proximity sensors are used to sense position on pneumatic actuators equipped with magnetic pistons from 2" to 8" bore. This proven design is rugged yet cost effective. All switches feature a self-adjusting clamp that grips standard NFPA and custom cylinders eliminating stocking requirements of many clamps for differ-ent bore sizes. The Series 7C boasts the larg est number of custom circuits to match applications found in the market. Examples include; 1 or 4 Amp reed switches, normally open, normally closed or SPDT switch types, reed or elec-tronic sensing elements in the same package style, not to mention the industry’s first 120 VAC Hall sensor. The low cost 7C features a ½” conduit hub and wire lead to meet stringent electrical codes in certain regions and applications.

MORE...

REQUEST
A
QUOTE
CATALOG PAGE
AND
INSTALLATION GUIDE
7GL - General Location

The Canfield Connector 7GL is an expansion of the popular Series 7000 “floating” clamp design, which adapts to NFPA tie rod linear actuators with 2 to 8 inch bore. This rugged magnetic proximity sensor can sense actuator position in stringent, general location applications. The switch features a robust, aircraft aluminum body, epoxy-filled, vibration and shock resistant, electronic circuit. Available in a normally open contact, the 7GL can switch current up to .5 Amps and has a voltage range of 0-120VAC/VDC 50/60 Hz.

MORE...

REQUEST
A
QUOTE
CATALOG PAGE
AND
INSTALLATION GUIDE
7HL - Hazardous Location

The Canfield Connector 7HL is a rugged magnetic proximity sensor designed to sense actuator position in stringent, haz-ardous location applications. The switch features a robust, epoxy-filled, aircraft aluminum body, and has a vibration and shock resistant, electronic circuit. The 7HL is an expansion of the popular Series 7000 “floating” clamp design and will clamp on 2 to 8 inch bore NFPA tie rod linear actuators. This product is designed to operate in hazardous locations, this switch is CSA approved for Class I, Division 2, Groups A, B, C, and D; Class II, Division 2, Groups F and G; and Class III.

MORE...

REQUEST
A
QUOTE
CATALOG PAGE
AND
INSTALLATION GUIDE
8000 - Low Current

The Canfield Connector 8000 Series Reed and Electronic sensors are compact units designed for sensing applications on round cylinders from 9/16" - 4" and tie-rod pneumatic cylinders from 3/4" - 8" bore. These sensors offer a wide voltage range from 0-120 VAC/VDC 50/60 Hz and high current capacity up to 0.5 Amps. They include high intensity indicator lights and a wide viewing angle. The sensor's small package can fit easily on the smallest cylinder without appearing too large. The Series 8000's design promotes ease of installation with a tight fit. Options include 9ft. PVC or 8mm quick connect male pigtail.

MORE...

REQUEST
A
QUOTE
CATALOG PAGE
AND
INSTALLATION GUIDE
9C - Round Groove (Bimba, Compact Air, DE-STA-CO, Robohand, SMC, Fabco)

The 9C Series is a compact, universal, magnetically operated proximity switch commonly used on aluminum extruded profile type linear actuators equipped with magnetic pistons. The switches are available in both reed and electronic styles and made to fit into a 4mm key hole type slot. Position fixing is accomplished by means of a screw that is supplied in the switch body. The on board indicator light shows instant switch diagnostics to minimize downtime and facilitate installation and can be seen from wide angles. Available in the standard 9 ft. PVC wired or optional 8mm quick con-nect, the switch can handle AC or DC current in several configurations. The 9C is constructed of engineered polymers and designed to meet IP 67 / NEMA 6 environmental specifications. Fits: Bimba, Compact Air, DE-STA-CO, Robohand, SMC, Fabco cylinder grooves

MORE...

REQUEST
A
QUOTE
CATALOG PAGE
AND
INSTALLATION GUIDE
9D - Dovetail Groove (Fabco, Numatics, Rotomation)

The Canfield Connector 9D Series is a universal, ultra-small, magnetic proximity switch available in both solid state electronic and reed styles. These sensors are designed to fit the most stringent space requirements by use of a standard .250 inch dovetail slot. Many other mounting options are also available. The electronic sensor exhibits greater sensitivity to magnetism with reduced dead-band and hysteresis as compared to competitive devices. The reed sensor offers a wide operating voltage range. The molded switch has an on board indicator light that can be viewed from wide angles. Standard connection to the sensor is provided by a 9 ft. PVC or 8mm quick connect male pigtail. The rugged switch is shipped with mounting hardware ready for installation. Fits: Fabco, Numatics, Rotomation cylinder grooves

MORE...

REQUEST
A
QUOTE
CATALOG PAGE
AND
INSTALLATION GUIDE
9E - Dovetail Groove (Fabco, Numatics, Rotomation)

The Canfield Connector 9E Series is a universal, ultra-small, magnetic proximity switch available in both solid state electronic and reed styles. These sensors are designed to fit the most stringent space requirements by use of a standard .250 inch dovetail slot. Many other mounting options are also available. The electronic sensor exhibits greater sensitivity to magnetism with reduced dead-band and hysteresis as compared to competitive devices. The reed sensor offers a wide operating voltage range. The molded switch has an on board indicator light that can be viewed from wide angles. Standard connection to the sensor is provided by a 9 ft. PVC or 8mm quick connect male pigtail. The rugged switch is shipped with mounting hardware ready for installation. Fits: Fabco, Numatics, Rotomation cylinder grooves

MORE...

REQUEST
A
QUOTE
CATALOG PAGE
AND
INSTALLATION GUIDE
9F - T-Slot Groove (Fabco, Festo, Numatics, Rotomation)

The Canfield Connector 9F Series is a universal, ultra-small, magnetic proximity switch available in both solid state electronic and reed styles. These sensors are designed to fit the most stringent space requirements by using a 4mm "T" slot. The electronic sensor exhibits greater sensitivity to magnetism with reduced dead-band and hysteresis as compared to competitive devices. The reed sensor offers a wide operating voltage range. The molded switch has an on board indicator light that can be viewed from wide angles. Standard connection to the sensor is provided by a 9 ft. PVC or 8mm quick connect male pigtail. The rugged switch is shipped with mounting hardware ready for installation. Fits: Fabco, Festo, Numatics, Rotomation cylinder grooves

MORE...

REQUEST
A
QUOTE
CATALOG PAGE
AND
INSTALLATION GUIDE
9H - T-Slot Groove (4x4)

The Canfield Connector 9H Series is a profile mounting type switch that fits in a 4mm X 4mm square groove which nor-mally is designed into an aluminum extrusion type linear actuator. Available in reed or electronic versions, the 9H is also available with a 9 ft. PVC or 8mm quick connect male pigtail. The switch is IP-67 which is dust tight and water resistant. Fits: 4x4 cylinder grooves

MORE...

REQUEST
A
QUOTE
CATALOG PAGE
AND
INSTALLATION GUIDE
9K - U Groove (Mindman, Koganei)

The Canfield Connector 9K Series is a profile mounting type switch that fits in a 4.2mm "U" groove which normally is designed into an aluminum extrusion type linear actuator. Available in reed or electronic versions, the 9K is also available with a 9 ft. PVC or 8mm quick connect male pigtail. The switch is IP67 which is dust tight and water resistant. Fits: Mindman, Koganei cylinder grooves

MORE...

REQUEST
A
QUOTE
CATALOG PAGE
AND
INSTALLATION GUIDE
9M50 - D Groove (Norgren)

The Canfield Connector 9M50 Series is a compact full featured magnetic proximity switch designed to fit a “D” shaped groove detail designed into linear actuators. The innovative design allows the switch to be inserted anywhere along the linear actuator and then rotated and locked into position. When installed the switch lies flat against the cylinder housing and does not protrude beyond the cylinder face making installations neat and clean. The fully encapsulated switch is offered in reed, and electronic styles in either NPN or PNP. The robust polyurethane encapsulated design meets IP67, NEMA 6 environmental protection. Voltage ranges are available from 0 to 120 VAC/DC in multiple versions. Standard connection is provided by a 9 ft. PVC or 8mm quick connect male pigtail and is proudly made in the U.S.A. Fits: Norgren cylinder grooves

MORE...

REQUEST
A
QUOTE
CATALOG PAGE
AND
INSTALLATION GUIDE
9Q - T-Slot Groove (Parker, Fabco, Festo, Numatics, Rotomation)

The Canfield Connector 9Q Series is a magnetic proximity switch that is engineered to fit into extruded actuators that are made with a “T” slot. The unique design of the 9Q enables it to be installed anywhere along the slot and assembled in place without taking off the actuator end-cap. The rugged polyurethane encapsulated switch features an innovative design that incorporates a hard nylon shell. The switches are available in reed or electronic sensing and features a standard on board indicator light. Offered as a flying lead or 8mm quick connect, the sensors are quickly and easily wired in to any application. The sensors meet NEMA 6 / IP67 environmental specifications and are corrosion and wash-down compatible. This sensor is proudly made in the USA. Fits: Parker, Fabco, Festo, Numatics, Rotomation cylinder grooves

MORE...

REQUEST
A
QUOTE
CATALOG PAGE
AND
INSTALLATION GUIDE
9U - T-Slot Groove (Fabco, Festo, Numatics, Parker, SMC)

The Canfield Connector 9U Series is a compact full featured magnetic proximity switch designed to fit a Fabco, Festo, Numatics, Parker and SMC T-slot groove detail designed into linear actuators. The innovative top down design allows the switch to be inserted anywhere along the linear actuator and tightened into position. When installed the switch lies flush against the cylinder housing making installations neat and clean. The fully encapsulated switch is offered in reed, and electronic styles in either NPN or PNP. The robust encapsulated design meets IP67, EN60529, NEMA 6 environmental protection. Voltage ranges are available for reed version from 0 to 240 VAC/DC and 5-30 VDC in electronic versions. Standard connection is provided by a 9 ft. PUR wire lead or 8mm quick connect male pigtail. Fits: Fabco, Festo, Numatics, Parker, SMC cylinder grooves

MORE...

REQUEST
A
QUOTE
CATALOG PAGE
AND
INSTALLATION GUIDE
CS - All Threaded Magnetic Sensor for Universal Applications

The Canfield Connector CS Series Cylindrical Threaded Mount Sensor is a rugged and compact magnetic sensor set within a miniature encapsulated Stainless Steel M8 threaded housing. Available in reed or electronic sensing, the CS sensor can sense magnets or magnetic objects in industrial machinery and mobile equipment. Typically used where greater sensing distance is required, the CS sensor changes state in the presence of a magnetic field. Electrical output for the CS is normally open, with sinking or sourcing outputs for the electronic versions. Input voltages available are 0 to 120 VAC/DC .5 Amp maximum for the reed and 5-24 VDC 0.2 Amp maximum for the electronic versions. The sensor is made of a Stainless Steel body, TPU encapsulant and has PVC wire standard and is NEMA 6. Temperature ranges are -20° to 80°C. The CS Series is proudly made in the U.S.A.

MORE...

REQUEST
A
QUOTE
CATALOG PAGE
AND
INSTALLATION GUIDE
VIEW
PRODUCT
VIDEOS


Stay up to date with our monthly emails and newsletter


Your email is safe with us, we don't spam


About Us

Products

Engineering Information

Contact

Location



CANFIELD CONNECTOR

8510 Foxwood Ct.

Youngstown, OH 44514 United States

P: (330) 758-8299 F: (330) 758-8912

Toll Free (800) 554-5071