← Back
5000 - Sub-Micro Field Wireable
DIN Connectors

5000 - Sub-Micro Field Wireable

Effective immediately, the lighted/suppressed sub-micro options are no longer available in the 5000 series field wireable version. Please see our 5F or 5J fully molded sub-micro product lines for supplementary options. Canfield Connector’s 5000 Series Sub-Micro connector is made to connect solenoid valves using the DIN Style “C” EN 175301-803 (Formerly DIN 43650) 8mm pin center, and the industry standard 9.4mm pin center. These standards permit industry interchangeability and have been embraced by the solenoid valve industry worldwide. Features include the ability for the user to wire the connector into existing installations or the connector can be pre wired at the factory. Wire connections are made inside the connector housing. The wire inlet is either PG7 or 1/2" conduit. Maximum current rating is 6 amps with a maximum conductor size of 20 gauge with an outer jacket not to exceed .260 inches diameter. The connectors are NEMA 4 and IP 65 environment rated.

Request a Quote