|
 |
|
 |
DIN 43650 Solenoid Valve Connectors & Accessories
Series 5J Molded DIN 43650 Connectors |
5F/5J Installation Guide | 5J Catalog Page
|
|
Home | Products | DIN 43650 Solenoid Valve Connectors & Accessories
Additional Information
The Canfield Series 5J all-molded DIN solenoid valve connector/gasket/cord assembly offers a completely molded design that is far better for environmental integrity than field wire versions. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The low profile "90°" interface/cord configuration allows for installation in many limited space applications. The integrated gasket design boasts an IP67/NEMA 6 rating and makes it impossible to lose the gasket. The 5J and 5F are the only molded valve connectors in the industry that feature a HARD USAGE cord as a standard option in any length required, bi-directional indicator lights, and load suppression (not intended for UL 1449). UL and CSA versions are available as well. Canfield offers any version of the 5J connector with special wires including high flex, media compatible wire, special use wire, high temperature wire on request. The Series 5J is Proudly Made in the U.S.A.
General Technical Data:
• Available in no circuit, lighted and load suppressed version for all connectors
• Cable conductor colors: European color code: Brown, blue, and yellow/green, (with 4th conductor version black)
US color code: White, black, and green, (with 4th conductor version red) Specials on request
• Cable types: Pressure extruded PVC jacket
Hard Usage cordage
"S" type with SJTOW standard PVC jacket (ISO and Mini only)
• Cross section of conductor wire: 18 Gauge standard (ISO and Mini)
20 Gauge standard (Sub-Micro)
• Rated voltage max.: 250V AC 50/60 Hz, 300V DC
• Rated current max.: 10 Amps (ISO and Mini), 6 Amps (Sub-Micro)
• Enclosure and molded in gasket materials: Polyurethane
• Ambient rated temperatures: -25° to 80°C
• Environment protection: IP 67 and NEMA 6, dust tight and water resistant
• Available in four sizes:
DIN 43650 Form "A" (ISO), EN175301-803:2000
DIN Form "C" (Sub-Micro 8mm), EN175301-803:2000
Industry standard (Sub-Micro 9.4mm pin spacing)
Industry standard (Mini 11mm pin spacing)
Contact us to learn more about the Series 5J Molded DIN 43650 Connectors
Note: Slight discoloration may occur to translucent material after prolonged exposure to UV rays.
|
|
|
|
|
