|
 |
|
 |
Optical Sensors & More
Model OSV - Optical Sensor & Valve |
OSV Catalog Page | OSV Wiring/Air Installation Guide
|
|
Home | Products | Optical Sensors & More
Additional Information
The Canfield Connector Model OSV is a fully-modular, easily-installable, optical sensor and valve combination for conveyor automation. This unit is designed for sensing objects moving through conveyor zones in order to maximize product flow while preventing product damage. By incorporating solid-state electronics and a low wattage solenoid valve, the OSV uses logic and manual inputs to reliably control a pneumatic actuator. The actuator either extends or retracts, controlling the movement of the conveyor zone. Features include adjustable sensitivity and output delay with LEDs to facilitate troubleshooting and a visual display of sensor modes. These LEDs indicate power status, beam alignment, beam clear, object detected, valve output, and slug mode. The modular design allows easy component replacement . The OSV is a reliable alternative to expensive, high-maintenance, pneumatic accumulation zones.
General Technical Data
• Supply Voltage: 20 - 28 VDC
• Supply Current: 65mA with 0.9W coil energized
• Slug Signal (input): 12µA max. per sensor sinking (NPN) (retro-reflective)
• Beam Signal (input): 5mA max. sourcing (PNP) (diffused)
• Beam Signal (output): 200mA max. sinking (NPN)
• Valve Orifice / Pressure: 1.0mm / 0 - 30 psi
• Valve Type: Normally Closed
• Operating Temperature: -10 to 50° C
|
|
|
|
|
