|
 |
|
 |
Electronic Timers & More
Model EOS-2 Tactile End of Stroke Pneumatic and Hydraulic Sensor |
EOS B (For OFF-Board Adj.)Installation Guide | EOS B (For ON board Adj.)Installation Guide | EOS 2 Catalog Page
|
|
Home | Products | Electronic Timers & More
Additional Information
The Canfield Connector EOS differential pressure switch is a compact device used in place of proximity switches to sense the end of stroke and/or clamping pressure of a linear actuator. Sensing the pressure on the exhaust and pressure side of the double acting cylinder enables the EOS to determine when the end of stroke is reached. The end of stroke is determined based on pressure, not proximity. Trip points are adjustable based on forces applied by the actuator. This unit is especially useful in applications with inconsistent size work pieces, clamping, staking, swaging, welding or where electronic magnetic proximity devices do not work as well. The EOS can replace proximity devices on applications where these devices are used to sense end of stroke. Installation is easier than standard proximity devices and cylinders can be made of any material. Cylinders need not incorporate any magnetic pistons or special flanged end caps.
General Technical Data
• Supply Voltage Range: 12 - 30 VDC / 24-48, 120 VAC
• Supply Current: 20 mA max.
• Current Output: .5 Amps AC / DC
• Analog Output: 3-5 VDC (4V @ 0 PSI) 5 mA max.
• Sensing Range: 0 to 100 PSI
• Response Time: 10 ms
• Repeatability: 0.1 PSI
• Hysteresis: 4 PSI max.
• Max. Pressure: 200 PSI
• Adjustability: 0.1 PSI
• Temperature Range: -25° to +85°C
• Enclosure Material: ABS, Epoxy
• Flame Rating: (UL94) V-O
• Media Compatibility: Liquids and gas compatible with glass, ceramic, silicone, RTV and nickel
Contact us to learn more about the EOS-2 Tactile End of Stroke Sensor
|
|
|
|
|
