 |
Home | Products | DIN 43650 Solenoid Valve Connectors & Accessories
Additional Information
The Canfield Series 5FR solenoid valve connectors incorporate a full-wave bridge rectifier inside a fully molded connector. The 5FR converts alternating current to direct current reducing coil burnout due to valve sticking. Also, direct current eliminates AC "hum" inherent to alternating current. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The low profile "straight-line" interface/cord configuration allows for installation in many limited space applications. The integrated gasket design boasts an IP67/NEMA 6 rating and makes it impossible to lose the gasket! Features bi-directional indicator lights, and load suppression (not intended for UL 1449). The Series 5FR is Proudly Made in the U.S.A.
General Technical Data
• Cable outlet: Molded construction with wire exiting out parallel to the face of the coil
• Color: Black standard or white translucent (for lighted versions)
• Cable conductor colors:
European color code: Brown, blue, and yellow/green
US color code: White, black, and green
Specials on request
• Cable types: Pressure extruded PVC jacket
HU - SJTOW jacket
• Cross section of conductor wire: 18 Gauge standard
• Rated voltage max.: 250V AC 50/60 Hz
• Voltage drop: 2.2 volt max.
• Current max: Continuous - 1 Amp
Inrush - 15 Amps for 15 ms
• All versions include MOV suppression
• Enclosure and molded in gasket materials: Polyurethane
• Ambient rated temperatures: -25° to 80°C
• Environment protection: IP 67 and NEMA 6, dust tight and water resistant
• Available:
DIN 43650 Form "A" (ISO), EN175301-803:2000
Industry standard (MINI 11mm pin spacing)
• Pin configurations: For single solenoid valves - 2 connections plus ground
Contact us to learn more about the Series 5FR Molded Rectified Connectors
Note: Slight discoloration may occur to translucent material after prolonged exposure to UV rays.
|
|
