Products

Canfield Connector offers a wide selection of quality electronic devices. We specialize in interconnection devices, electronic timers, proximity sensors, modules and specialty electronic devices.  Our DIN 43650 solenoid valve connectors are the core of Canfield Connector and come in MINI, ISO and Sub-Micro 8mm or 9.4mm sizes, and both hardwired or fully molded versions to fit your needs.





Molded DIN 43650 Solenoid Valve Connectors

Field Wire DIN 43650 Solenoid Valve Connectors

Male DIN 43650 Solenoid Valve Connectors & Accessories

Fieldbus Adapter DIN 43650 Solenoid Valve Connectors

CanGrip Wire Strain Relief Cord Grips

Tie Rod and Round Cylinder Proximity Sensors

Grooved Cylinder Proximity Sensors

All Threaded Magnetic Sensors

M8 Round Connectors

M12 Round Connectors

Double Ended Round Connectors

Timers and Electronics

Proportional Solenoid Drivers

Conveyor Controls

Condensate Drain Valves

Custom Assemblies

Sales Aids





Product Search
Name
Part Number
Functionality
Market


8WS - Dovetail Groove (Numatics Grooves)

The Canfield Connector Series 8WS reed and electronic magnet sensors are rugged yet compact switches used to sense position on pneumatic actuators equipped with a magnetic piston and 12mm dovetail groove. The switch can be slipped in and tightened from anywhere along the groove that is fabricated into the cylinder wall or clamping system. The switch features a die cast holder which clamps to the cylinder groove while the electronics are fully encapsulated and resistance to environment. These sensors offer a wide voltage range from 0-120 V AC/DC 50/60Hz and have a up to a 500 mA switching current rating. The switch has a high intensity indicator light which indicates power to the switch and load. The switch comes standard with 9 ft. PVC or 8mm quick connect male pigtail. Fits: Numatics cylinder grooves

MORE...

9D - Dovetail Groove (Fabco, Numatics, Rotomation)

The Canfield Connector Series 9D is a universal, ultra-small, magnetic proximity switch available in both solid state electronic and reed styles. These sensors are designed to fit the most stringent space requirements by use of a standard .250 inch dovetail slot. Many other mounting options are also available. The electronic sensor exhibits greater sensitivity to magnetism with reduced dead-band and hysteresis as compared to competitive devices. The reed sensor offers a wide operating voltage range. The molded switch has an on board indicator light that can be viewed from wide angles. Standard connection to the sensor is provided by a 9 ft. PVC or 8mm quick connect male pigtail. The rugged, fully encapsulated switch is shipped with mounting hardware ready for installation. Fits: Fabco, Numatics, Rotomation cylinder grooves

MORE...

9E - Dovetail Groove (Fabco, Numatics, Rotomation)

The Canfield Connector Series 9E is a universal, ultra-small, magnetic proximity switch available in both solid state electronic and reed styles. These sensors are designed to fit the most stringent space requirements by use of a standard .250 inch dovetail slot. Many other mounting options are also available. The electronic sensor exhibits greater sensitivity to magnetism with reduced dead-band and hysteresis as compared to competitive devices. The reed sensor offers a wide operating voltage range. The molded switch has an on board indicator light that can be viewed from wide angles. Standard connection to the sensor is provided by a 9 ft. PVC or 8mm quick connect male pigtail. The rugged, fully encapsulated switch is shipped with mounting hardware ready for installation. Fits: Fabco, Numatics, Rotomation cylinder grooves

MORE...

8F - Round Groove (Wika)

The Canfield Connector Series 8F is a compact yet rugged magnetic reed type proximity sensor designed for rigorous applications where critical magnetic sensing is needed. The tough nylon shell is over-molded with polyurethane to create an environmentally resilient seal from the elements and is rated to IP67. The compact size and cylindrical shape are ideal for mounting in a simple hole or cylindrical shape. There is a tab mounting version also available. The 8F can be mounted solidly and fit into many common magnetic sensing applications. Offered standard with 9ft. cord or an M8 quick connect connector, the switch is also available in either normally open or normally closed switch types. Fits: Wika cylinder grooves

MORE...

9C - Round Groove (Bimba, Compact Air, DE-STA-CO, Robohand, SMC)

The Series 9C is a compact, universal, magnetically operated proximity switch commonly used on aluminum extruded profile type linear actuators equipped with magnetic pistons. The switches are available in both reed and electronic styles and made to fit into a 4mm key hole type slot. Position fixing is accomplished by means of a screw that is supplied in the switch body. The on board indicator light shows instant switch diagnostics to minimize downtime and facilitate installation and can be seen from wide angles. Available in the standard 9 ft. PVC wired or optional 8mm quick connect, the switch can handle AC or DC current in several configurations. The 9C is assembled in engineered polymers and designed to meet NEMA 6 / IP 67 environmental specifications. Fits: Bimba, Compact Air, DE-STA-CO, Robohand, SMC cylinder grooves

MORE...

9M50 - Round Groove (Norgren)

The Canfield Connector 9M50 is a compact full featured magnetic proximity switch designed to fit a “D” shaped groove detail designed into linear actuators. The innovative design allows the switch to be inserted anywhere along the linear actuator and then rotated and locked into position. When installed the switch lies flat against the cylinder housing and does not protrude beyond the cylinder face making installations neat and clean. The fully encapsulated switch is offered in reed, and electronic styles in either NPN or PNP. The robust epoxy encapsulated design meets IP67, NEMA 6 environmental protection. Voltage ranges are available from 5 to 120 VAC/DC in multiple versions. Maximum current draw is 200 mA. Standard connection is provided by a 9 ft. PVC or 8mm quick connect male pigtail. Fits: Norgren cylinder grooves

MORE...

9N - Round Groove (SMC)

The Canfield Connector 9N is a right angle version of the popular 4.25mm round groove type switches commonly used in aluminum extrusion type linear actuators. The 9N features reed or electronic versions and are available in standard 9 ft. PVC or 8mm quick connect male pigtail. The 9N is IP-67 which makes it dust tight and water resistant. Fits: SMC cylinder grooves

MORE...

9K - U Groove (Mindman, Koganei)

The Canfield Connector Series 9K is a profile mounting type switch that fits in a 4.2mm "U" groove which normally is designed into an aluminum extrusion type linear actuator. Available in reed or electronic versions, the 9K is also available with a 9 ft. PVC or 8mm quick connect male pigtail. The switch is IP67 which is dust tight and water resistant. Fits: Mindman, Koganei cylinder grooves

MORE...

9Q - T-Slot Groove (Parker)

The Canfield Connector Series 9Q is a magnetic proximity switch that is engineered to fit into extruded actuators that are made with a “T” slot. The unique design of the 9Q enables it to be installed anywhere along the slot and assembled in place without taking off the actuator end-cap. The rugged polyurethane encapsulated switch features an innovative design that incorporates a hard nylon shell. The switches are available in reed or electronic sensing and feature surge suppression and on board indicator light standard. Offered as a flying lead or 8mm quick connect, the sensors are quickly and easily wired in to any application. The sensors meet NEMA 6 / IP67 environmental specifications and are corrosion and wash-down compatible. This sensor is proudly made in the USA. Fits: Parker cylinder grooves

MORE...

9T - T-Slot Groove (SMC)

The Canfield Connector Series 9T is a compact yet robust switch used to sense position of magnetic pistons designed into aluminum extrusion type linear actuators. The 9T fits a 7.2mm X 3.9mm rectangular groove which is designed into the actuator body. Available in reed or electronic versions, the 9T features standard 9 ft. PVC or 8mm quick connect male pigtail, and are rated IP-67 against the ingress of dust and water. Fits: SMC cylinder grooves

MORE...

9F - T-Slot Groove (Fabco, Festo, Numatics, Rotomation)

The Canfield Connector Series 9F is a universal, ultra-small, magnetic proximity switch available in both solid state electronic and reed styles. These sensors are designed to fit the most stringent space requirements by using a 4mm "T" slot. The electronic sensor exhibits greater sensitivity to magnetism with reduced dead-band and hysteresis as compared to competitive devices. The reed sensor offers a wide operating voltage range. The molded switch has an on board indicator light that can be viewed from wide angles. Standard connection to the sensor is provided by a 9 ft. PVC or 8mm quick connect male pigtail. The rugged, fully encapsulated switch is shipped with mounting hardware ready for installation. Fits: Fabco, Festo, Numatics, Rotomation cylinder grooves

MORE...

9G - T-Slot Groove (Fabco, Numatics, Rotomation)

The Canfield Connector 9G linear magnetic position sensor is designed to work with aluminum extrusion type actuators that have a 6.2mm X 4.4mm rectangular groove designed into the body. Available in reed or electronic versions, the 9G fits into commonly used sensor grooves. Standard connection to the sensor is provided by a 9 ft. PVC or 8mm quick connect male pigtail. The switch is water resistant and dust tight to IP67. Fits: Fabco, Numatics, Rotomation cylinder grooves

MORE...

9H - T-Slot Groove (4x4)

The Canfield Connector Series 9H is a profile mounting type switch that fits in a 4mm X 4mm square groove which normally is designed into an aluminum extrusion type linear actuator. Available in reed or electronic versions, the 9H is also available with a 9 ft. PVC or 8mm quick connect male pigtail. The switch is IP67 which is dust tight and water resistant. Fits: 4x4 cylinder grooves

MORE...



Search Our Site


About Us

Products

Engineering Information

Contact

Location



CANFIELD CONNECTOR

8510 Foxwood Ct.

Youngstown, OH 44514 United States

P: (330) 758-8299 F: (330) 758-8912

Toll Free (800) 554-5071